Topic: New Raspberry Pi Camera
The Raspberry Pi Foundation has just announced a new version of the official Pi camera. It is 8 megapixels, uses a SONY IMX219 sensor, and is priced the same as the earlier version.
Re: New Raspberry Pi Camera
still not adjustable focus like old one? there are lots of after market lens etc so they should make one
Solidoodle 2 with Deluxe kit cover & glass bed with heater. and 2nd board SD2 used not 3rd and alum platform not installed yet still wood. also need cooling fan installed to board. use Repetier Host couple vers. Slic3r also have all free ware STL programs
Re: New Raspberry Pi Camera
So, Uriah, are you hinting at something maybe?
Re: New Raspberry Pi Camera
I just got the v2 camera in today from Adafruit. Hopefully this weekend I can hook it up and see how it works.
SD3, Lawsy Carriages with GT2 belts on x axis, BLTouch, Bondtech BMG extruder, E3D v6 via bowden, MIC6 bed with 200W heater w/SSR relay and a RUMBA controller
Re: New Raspberry Pi Camera
The new v2 camera arrived yesterday but it looks like there are a few kinks in the firmware still. Most noticeably, everything is flipped from the previous camera and the video modes are center cropped. Surprisingly, it's focused at a distance just right for ATLAS 3D (~12") but gets out of focus at distances greater than about 18 inches. It's hard to believe that was an intentional decision. I guess we'll see.
Re: New Raspberry Pi Camera
Was this ever sorted? I can't find anything in any config files to flip the camera. I've found how to do it using raspistill and raspivid but I don't know how freelss accesses the camera since you can't modify the registered version.. Or is there some global config file on the pi that does it system wide? This is the only post I have found about it, so I'm assuming others have fixed it on theirs..