1

Topic: Abrasive Filaments

So far I know that these filaments are abrasive:

  • Carbon Fiber

  • Glow In The Dark

  • Metal Fills (iron, bronze, copper, etc)

  • Brick

What I am asking is if wood filament is abrasive?

2

Re: Abrasive Filaments

Wood filament is more abrasive than your standard PLA and ABS, however, it's not as noticeable as the filaments you mention. This is simply because wood fibre is a softer material than the materials you mention. Therefore you won't experience too much abrasion with wood filament.

3Dex - Suppliers of the best filament.
http://www.3dexfilament.co.uk

3

Re: Abrasive Filaments

Any filament that has filers added to it will be abrasive, it is just a matter of how abrasive they are.

Wood fill would be dependent on how much wood fiber is added to the plastic, and to some degree, what type of wood.

SD4 #1 & #2 - Lawsy carriages, E3D v6, Rumba controller board, mirror bed plate, X motor fan, upgraded PSU & Mica bed heater
SD4 #3 - in the works ~ Folgertech FT-5, rev 1
Printit Industries Beta Tester - Horizon H1

4

Re: Abrasive Filaments

Wood filament is made of wood powder and pla resin, So the adhesive is likes PLA. Both are adhesive.

Professial 3D Printing Filament Manufacturer
www.ecoreprap.com

5

Re: Abrasive Filaments

Barret Zhang wrote:

Wood filament is made of wood powder and pla resin, So the adhesive is likes PLA. Both are adhesive.

Way to beat a dead horse! Trying to get a post count? all your posts have been on old old threads

Sd4 #9080 with a glass bed. E3d chimera duel extruder. Paste extruder , duet wifi.
Lawsy carriages. linear bearings. Y axis direct drive, Kinect scanner
SD4#8188 glass bed, lawsly carriages, E3d v6, octoprint http://www.ustream.tv/channel/hotrod96z28
Filastruder/filawinder, Custom Delta 300mm x 600mm

6

Re: Abrasive Filaments

He is a tag line spammer . Every time he "helps"  someone he posts the link to his web page .

Soliddoodle 4 stock w glass bed------Folger Tech Prusa 2020 upgraded to and titan /aero extruder mirror bed
FT5 with titan/ E3D Aero------MP mini select w glass bed
MP Utimate maker pro-W bondtech extruder
Marlin/Repetier Host/ Slic3r and Cura

7

Re: Abrasive Filaments

I noticed that

Sd4 #9080 with a glass bed. E3d chimera duel extruder. Paste extruder , duet wifi.
Lawsy carriages. linear bearings. Y axis direct drive, Kinect scanner
SD4#8188 glass bed, lawsly carriages, E3d v6, octoprint http://www.ustream.tv/channel/hotrod96z28
Filastruder/filawinder, Custom Delta 300mm x 600mm

8

Re: Abrasive Filaments

Problem solved,  I guess you could say I am a tag line spammer also wink

Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions