1 Topic by skyline1

  • skyline1
  • Newbie
  • Offline
  • Registered: 2016-02-06
  • Posts: 3

Topic: Hello all new to the forum

Hello Everybody

I'm new to the forum and 3d printing in general, so please excuse some of my newbie posts I'm still getting the hang of it all

Regards Mark

2 Reply by Tin Falcon

  • Tin Falcon
  • Tin Falcon
  • Member
  • Offline
  • From: New Jersey, USA
  • Registered: 2014-08-01
  • Posts: 2,424

Re: Hello all new to the forum

Welcome: Please ask questions there are no dumb questions.
Be aware forums do often have to deal with the question that is seemingly asked every day. So it a good idea to search the board for info before posting as there is a good chance your question has been asked before. Please avoid double or multiple posts with the same topic or questions this clutters the forum and leads to confusion and frustration.
Tin

Soliddoodle 4 stock w glass bed------Folger Tech Prusa 2020 upgraded to and titan /aero extruder mirror bed
FT5 with titan/ E3D Aero------MP mini select w glass bed
MP Utimate maker pro-W bondtech extruder
Marlin/Repetier Host/ Slic3r and Cura

3 Reply by driggers

  • driggers
  • Member
  • Offline
  • Registered: 2012-10-07
  • Posts: 162

Re: Hello all new to the forum

Welcome!

SD2 Sanguinololu 1.3a atmega1284p, wood platform, lawsy's carriages, braided fishing line, pallet wood overhead spool mount, carboard/magnet enclosure, glass bed, E3D v6, bed levelling knobs, extended z-stop, 25A DC-DC SSR for bed heater, everything fixed to the SD2 frame, marlin firmware with some adjustments and extra failsafes enabled.  I'll never give up on you, little printer that could(n't)!

4 Reply by Kronikabuse

  • Kronikabuse
  • Kronikabuse
  • Member
  • Offline
  • From: Wi
  • Registered: 2014-08-03
  • Posts: 709

Re: Hello all new to the forum

welcome to the board

Sd4 #9080 with a glass bed. E3d chimera duel extruder. Paste extruder , duet wifi.
Lawsy carriages. linear bearings. Y axis direct drive, Kinect scanner
SD4#8188 glass bed, lawsly carriages, E3d v6, octoprint http://www.ustream.tv/channel/hotrod96z28
Filastruder/filawinder, Custom Delta 300mm x 600mm

5 Reply by heartless

  • heartless
  • heartless
  • Member
  • Offline
  • From: Northcentral Wisconsin
  • Registered: 2015-04-08
  • Posts: 2,152

Re: Hello all new to the forum

the only dumb question is the one left unasked. so ask away!

and welcome aboard! smile

SD4 #1 & #2 - Lawsy carriages, E3D v6, Rumba controller board, mirror bed plate, X motor fan, upgraded PSU & Mica bed heater
SD4 #3 - in the works ~ Folgertech FT-5, rev 1
Printit Industries Beta Tester - Horizon H1