1 Topic by solitairex79

  • solitairex79
  • Newbie
  • Offline
  • Registered: 2016-02-08
  • Posts: 3

Topic: Simplify3D with Davinci 1.0A Bed trouble

Hello All, I recently got the 1.0A and im using Simplify3D. I am able to connect and send jobs but i hit the print bed as soon as the job begins. I am using stock firmware but the Simplify3D does not have the Davinci profile. Can someone send me list of the settings or maybe even an exported profile? XYZware is terrible and i really want to use Simplify3D if i can correct the bed issues.

2 Reply by robertf (edited by robertf 2016-02-08 16:41:34)

  • robertf
  • Member
  • Offline
  • Registered: 2015-04-08
  • Posts: 78

Re: Simplify3D with Davinci 1.0A Bed trouble

clear out any starting and ending gcode in the scripts tab.  my 1.0a and 2.0 did not need it.  The 1.0 regular does need an ending script or it will hang at 99% and not drop the bed and turn off the heaters

this may also be firmware dependant.   I think ive got j and f running on my 1.0 and 2.0

Ill post up my fff files this evening    what version are you using?  Im still on 2.2.2.   I need to switch to the newer one but Dont feel like setting everything up again

you could also just use the 2.0 profile that is included and change the bed width and remove the second extruder from the temperature tab.  it will work on a 1.0a by doing that

3 Reply by solitairex79

  • solitairex79
  • Newbie
  • Offline
  • Registered: 2016-02-08
  • Posts: 3

Re: Simplify3D with Davinci 1.0A Bed trouble

robertf wrote:

clear out any starting and ending gcode in the scripts tab.  my 1.0a and 2.0 did not need it.  The 1.0 regular does need an ending script or it will hang at 99% and not drop the bed and turn off the heaters

this may also be firmware dependant.   I think ive got j and f running on my 1.0 and 2.0

Ill post up my fff files this evening    what version are you using?  Im still on 2.2.2.   I need to switch to the newer one but Dont feel like setting everything up again

you could also just use the 2.0 profile that is included and change the bed width and remove the second extruder from the temperature tab.  it will work on a 1.0a by doing that

Im running the latest firmware on the 1.0A. I also calibrated the bed and all my test prints and demo come out fine. Ill try cleaning out the code when i get home. Thanks in advance for posting your FFF files.

4 Reply by robertf

  • robertf
  • Member
  • Offline
  • Registered: 2015-04-08
  • Posts: 78

Re: Simplify3D with Davinci 1.0A Bed trouble

well maybe you do need the ending script.  Looks like I had it


here is the 1.0a FFF
http://www.flemcodesign.com/files/XYZDAVINCI1.zip

5 Reply by solitairex79

  • solitairex79
  • Newbie
  • Offline
  • Registered: 2016-02-08
  • Posts: 3

Re: Simplify3D with Davinci 1.0A Bed trouble

robertf wrote:

well maybe you do need the ending script.  Looks like I had it


here is the 1.0a FFF
http://www.flemcodesign.com/files/XYZDAVINCI1.zip

Thank you so much. This is just what i needed.