26 Reply by hansen644

  • hansen644
  • Member
  • Offline
  • Registered: 2014-09-10
  • Posts: 291

Re: how to set up second printer?

ok thank  you

27 Reply by IronMan

  • IronMan
  • IronMan
  • PRINTiT
  • Offline
  • From: SC
  • Registered: 2012-09-14
  • Posts: 1,269

Re: how to set up second printer?

Oh, and check / switch out the USB cable...

SD2 - Stock - Enclosure - Heated Bed - Glass Plate - Auto Fire Extinguisher
Ord Bot Hadron - RAMPS 1.4 - Bulldog XL - E3D v6 - 10" x 10" PCB Heated Build w/SSR - Glass Plate
Thanks for All of Your Help!

28 Reply by hansen644

  • hansen644
  • Member
  • Offline
  • Registered: 2014-09-10
  • Posts: 291

Re: how to set up second printer?

what do mean?

29 Reply by hansen644 (edited by hansen644 2015-06-06 16:06:09)

  • hansen644
  • Member
  • Offline
  • Registered: 2014-09-10
  • Posts: 291

Re: how to set up second printer?

Usb cord is good

30 Reply by IronMan (edited by IronMan 2015-06-06 16:16:12)

  • IronMan
  • IronMan
  • PRINTiT
  • Offline
  • From: SC
  • Registered: 2012-09-14
  • Posts: 1,269

Re: how to set up second printer?

Since you mentioned you have already flashed different selections of firmware and seem comfortable doing it, then the only other thing I can advise is to go to the Repetier Firmware site and start trying to modify particular settings in your configuration.h and other related files.

http://www.repetier.com/documentation/r … tallation/

I wish I could help further...

SD2 - Stock - Enclosure - Heated Bed - Glass Plate - Auto Fire Extinguisher
Ord Bot Hadron - RAMPS 1.4 - Bulldog XL - E3D v6 - 10" x 10" PCB Heated Build w/SSR - Glass Plate
Thanks for All of Your Help!

31 Reply by hansen644

  • hansen644
  • Member
  • Offline
  • Registered: 2014-09-10
  • Posts: 291

Re: how to set up second printer?

Well I got it back to where I can turn the fan on and off and heat the extruder. but that is all so far

32 Reply by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: how to set up second printer?

hansen644 wrote:

Well I got it back to where I can turn the fan on and off and heat the extruder. but that is all so far

This is Marlin, configured for a 1.0 on RAMPS 1.4. Flash it and see where it gets you..

Post's attachments

TEST Marlin.rar 2.42 mb, 2 downloads since 2015-06-06 

You don't have the permssions to download the attachments of this post.
Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.

33 Reply by hansen644

  • hansen644
  • Member
  • Offline
  • Registered: 2014-09-10
  • Posts: 291

Re: how to set up second printer?

Hi I am not trying to get if on my davinci.  Trying to get my new smartone 200 up and running.  Thanks

34 Reply by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: how to set up second printer?

hansen644 wrote:

Hi I am not trying to get if on my davinci.  Trying to get my new smartone 200 up and running.  Thanks

It should still work, as my Da Vinci is no longer a Da Vinci but a RAMPS 1.4.

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.

35 Reply by hansen644

  • hansen644
  • Member
  • Offline
  • Registered: 2014-09-10
  • Posts: 291

Re: how to set up second printer?

HI I do not have a .rar file opener.  can you send it in a different file format?

36 Reply by n2ri

  • n2ri
  • Member
  • Offline
  • From: St Louis MO USA area
  • Registered: 2013-02-03
  • Posts: 2,539

Re: how to set up second printer?

I dont recommend using low com port numbers as new 'plug and play' items will steal the lowest unused port (since 3D printers run as virtual serial they are not seen) use highest numbers like 12-24 to avoid issues in future when adding new hardware like I did. and techs couldnt fix it. took me a week to figure it out

Solidoodle 2 with Deluxe kit cover & glass bed with heater. and 2nd board SD2 used not 3rd and alum platform not installed yet still wood. also need cooling fan installed to board. use Repetier Host couple vers. Slic3r also have all free ware STL programs

37 Reply by n2ri

  • n2ri
  • Member
  • Offline
  • From: St Louis MO USA area
  • Registered: 2013-02-03
  • Posts: 2,539

Re: how to set up second printer?

search net for 7zip. it opens lots of odd types

Solidoodle 2 with Deluxe kit cover & glass bed with heater. and 2nd board SD2 used not 3rd and alum platform not installed yet still wood. also need cooling fan installed to board. use Repetier Host couple vers. Slic3r also have all free ware STL programs

38 Reply by hansen644

  • hansen644
  • Member
  • Offline
  • Registered: 2014-09-10
  • Posts: 291

Re: how to set up second printer?

Intallled 7zip and your file will not install?

39 Reply by hansen644

  • hansen644
  • Member
  • Offline
  • Registered: 2014-09-10
  • Posts: 291

Re: how to set up second printer?

In marlin that I have already installed it shows no bed and shows extruder temp at 464 degrees?  with the extruder turned off or on

40 Reply by hansen644

  • hansen644
  • Member
  • Offline
  • Registered: 2014-09-10
  • Posts: 291

Re: how to set up second printer?

Ok got the temp on the exturder problem corrected in the firmware.  Now bed still now showing up in repiter host?

41 Reply by hansen644

  • hansen644
  • Member
  • Offline
  • Registered: 2014-09-10
  • Posts: 291

Re: how to set up second printer?

Got the bed to show up now, only thing left is to get the stepper motors to move.  Can not figure it out yet.  I can bump them 1mm and then they stop

42 Reply by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: how to set up second printer?

hansen644 wrote:

Got the bed to show up now, only thing left is to get the stepper motors to move.  Can not figure it out yet.  I can bump them 1mm and then they stop

The problem is with your endstops. I would just work on one axis at a time.

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.

43 Reply by hansen644

  • hansen644
  • Member
  • Offline
  • Registered: 2014-09-10
  • Posts: 291

Re: how to set up second printer?

Ok thanks.

44 Reply by oscarvmorris

  • oscarvmorris
  • Banned
  • Offline
  • Registered: 2015-06-10
  • Posts: 3

Re: how to set up second printer?

Printer not working .What is the problem?

http://omnix.ae/

45 Reply by wardjr

  • wardjr
  • wardjr
  • Moderator
  • Offline
  • From: Minnesota
  • Registered: 2013-06-10
  • Posts: 5,623

Re: how to set up second printer?

oscarvmorris wrote:

Printer not working .What is the problem?

That's a very specific problem,  hold on while I get you the answer roll

Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions

wardjr's Website

46 Reply by JanieRMarten

  • JanieRMarten
  • Newbie
  • Offline
  • Registered: 2015-07-07
  • Posts: 3

Re: how to set up second printer?

I  can not use my printer . its stop work after sometimes and sometimes.whats the problem can be behind this problem?

47 Reply by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: how to set up second printer?

If you guys want help you need to be specific. I know it may be hard due to language and such but we need as much detail as possible. Like when does stop, what are the temperatures when stops? Are there any errors displayed by the printer or the host? What are you printing? Is your machine stock and not modified? What host are you using. That is just some of the information we need.

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.

48 Reply by wardjr

  • wardjr
  • wardjr
  • Moderator
  • Offline
  • From: Minnesota
  • Registered: 2013-06-10
  • Posts: 5,623

Re: how to set up second printer?

JanieRMarten wrote:

I  can not use my printer . its stop work after sometimes and sometimes.whats the problem can be behind this problem?

Something doesn't add up here. http://www.soliforum.com/post/100572/#p100572

Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions

wardjr's Website